New Page 1

- I N S T A L L S I N 1 0 E A S Y S T E P S -
1	Engine must be off and key removed from ignition
2	Locate the injection pump connector
3	Remove pump connector
4	Identify male and female ends on the DiabloSport PowerPuck
5	Connect the DiabloSport PowerPuck male cable end to the factory harness end
6	Make sure that the interlock connector is open completely
7	Connect the DiabloSport PowerPuck female cable end to the Diesel Injection Pump
8	Make sure that the interlock connector closes completely
9	The PowerPuck will find its home on top of the fuse box cover (this will allow for quick and easy access) Clean the top of the fuse box with the alcohol pad procided Wait till the alchol dissipates
10	Carefully peel off the velcro protective film and firmly affix the PowerPuck in place Let it dry for 24 hours before removing Puck